Commercial · Multi-Family
Apartment Pressure Washing Lexington, KY | Breezeways, Stairs & Parking
Apartment pressure washing in Lexington means clean breezeways, stair treads, walkways, parking, and dumpster pads, without a mess for your residents. We work one section at a time, and we’ll keep wash water out of storm drains.


Professional Pressure Washing

Insured, COI on Request

Free Estimates
Apartment Community Pressure Washing in Lexington, KY
Apartments in Lexington collect algae on shaded breezeways, grime on stair treads, and grease at the dumpster pad. We clean those common areas on a plan that doesn’t fight with your leasing calendar. We also handle commercial pressure washing for stores and offices. Here’s how apartment work goes.
- Typical cost: $0.20 to $0.40 per square foot for most commercial concrete, quoted after a walkthrough
- Method: soft wash on siding, surface cleaners on flat concrete, hot water and degreaser on dumpster pads
- How often: twice a year for most communities, and more often in heavy shade
- Guarantee: 30 days, and we re-clean the area free if buildup returns
Why Do Lexington Apartment Communities Need Regular Exterior Cleaning?
About 43 percent of households in the Lexington area rent, according to HUD housing market data . Renters expect clean entries and safe stairs, and prospects judge a community on the first walk. Clean common areas also look better in listing photos. Shared areas in a neighborhood with a board are covered on our HOA pressure washing page.
Stairs and walkways matter most for safety. Under KRS 383.595, landlords covered by Kentucky’s landlord-tenant act must keep common areas clean and safe, and algae on a wet stair tread is slippery. We cover the other common problems in our Lexington exterior problems guide , including algae and freeze-thaw damage.
What Gets Cleaned at an Apartment Community?
Area | How we clean it |
Breezeways and stairwells | We use a surface cleaner on floors and stair treads and a gentle rinse on walls. Spray stays off door seals. |
Sidewalks and walkways | A surface cleaner gives an even finish, and shaded stretches get an algae and mildew treatment. |
Parking lots and decks | Surface cleaners handle open areas. Oil spots get degreaser and hot water, and wash water doesn’t reach a storm drain. |
Dumpster pads and enclosures | Hot water and degreaser cut the grease, and we’ll collect the wash water. Rust on rails or electrical boxes? See our guide on rust stain removal. |
Building siding | A soft wash uses low pressure and a cleaning solution, so vinyl, stucco, and paint don’t get blasted. |
Pool decks and amenity areas | A surface cleaner works the deck, and we schedule around amenity hours. |
What Do Residents Need to Do Before We Clean?
A good notice goes up a few days ahead. It tells residents to close and lock windows, clear balconies and patios, and move cars out of the work zone. We clean ground-level common areas by default. Private balconies and patios go in the scope only when you approve them and residents clear them first. Anything left in the work area may get washed in place or skipped. For the best months to clean, see our scheduling guide .
Our Process for Apartment Communities
Walkthrough and Scope
We walk the property with you and list every building, stairwell, and surface in the scope. We also photograph any damage that’s already there before we start.
Resident Notice
You post the notice a few days ahead. Residents close and lock their windows, clear balconies, and move cars out of the work zone.
Section-by-Section Cleaning
We work one section at a time, so walkways stay open. Siding gets a soft wash, flat concrete gets a surface cleaner, and dumpster pads get degreaser and hot water.
Rinse & Walk-Through
We rinse, keep water away from storm drains, and walk the property with you. If we missed anything, we fix it before we leave.
How Much Does Apartment Pressure Washing Cost in Lexington, KY?
Commercial concrete cleaning in Lexington usually runs $0.20 to $0.40 per square foot. We quote apartment jobs after a walkthrough, because buildings, stairs, and buildup change the scope. Spring and fall visits on a plan cost less than a first deep clean, since the heavy buildup is already gone. See our pricing guide for ranges on other services.
- Square footage and number of buildings
- Stairs, breezeways, and multi-story access
- How heavy the algae, grease, or buildup is
- Water access on site and pickup needs at dumpster pads
Why Choose Our Lexington Apartment Cleaning Crew
Insured, With a COI
We carry active general liability insurance, and we’ll send a certificate of insurance on request.
A Wash Water Plan
We cover storm drains, use degreaser and hot water on grease, and collect and filter the wash water at dumpster pads. Nothing goes down a storm drain.
Guaranteed Work
Every apartment job is backed by our 30-day guarantee. If buildup comes back in a cleaned area, we’ll clean it again at no charge.
Common Questions
Apartment Cleaning FAQs
Property managers ask these questions before scheduling apartment power washing in Lexington.
Our 30-Day Satisfaction Guarantee
If the same buildup comes back in a cleaned area within 30 days, we’ll come back and clean it again at no extra charge. That guarantee is our promise on the quality of our work. Just call us or request service on our website.
Related Commercial Cleaning Services
Apartment communities often need more than one service. Here are a few related ones.
Get a Free Apartment Estimate
Ready for cleaner common areas? Request a free estimate, and we’ll walk the property and recommend a plan. See how Lexington PressureWash handles every job.
