Residential · Soft Washing

House Washing Lexington KY for Dirty, Algae-Stained Siding

Give your home a cleaner, well-maintained appearance with professional house washing in Lexington, KY. We remove dirt, algae, mildew, and other exterior buildup from siding and surrounding surfaces using a cleaning method matched to the material.

House Washing Lexington KY
soft washing icon

Soft Washing for Delicate Surfaces

siding specialists icon

Siding Cleaning Specialists

free estimates

Free Estimates

What House Washing Does for Lexington Siding

A home’s exterior takes weather every day, and it shows. In Lexington, regular rain, humid summers, shaded walls, and spring pollen give algae, mold, and mildew plenty to work with. Tree pollen peaks here in March and April, and Lexington gets roughly 45 to 50 inches of precipitation a year, so siding on the shady side often stays damp. That buildup gets harder to remove the longer it sits.

House washing is the exterior cleaning of siding, trim, fascia, and soffits with a soft wash, which uses low pressure and a cleaning solution made for siding. The solution breaks down algae, mildew, and dirt, and a gentle rinse carries it away. Our soft washing service uses the same method on roofs, fences, and other delicate surfaces.

  • Typical cost: starts around $300 to $500 for a smaller home
  • Method: soft wash, with low pressure and a cleaning solution made for siding
  • Covered: siding, fascia, soffits, gutter exteriors, downspouts, and entryways
  • How often: every 12 to 24 months for most Lexington homes, sooner with shade
  • Guarantee: 30 days, and we re-clean the area free if the same algae or mildew returns

What’s Included in a House Wash?

A typical house wash covers the outside of your home where dirt and organic growth collect most: siding, fascia, soffits, gutter exteriors, downspouts, entryways, and other accessible surfaces. We inspect the property first and adjust the approach for the material and condition of each area. A house wash doesn’t include siding repair, painting, or caulking, but we point out loose siding, peeling paint, and failed caulk at the inspection so you know what to plan for.

House Washing for Different Siding Materials

Vinyl

Holds up well to soft washing, but too much pressure can force water behind panels or crack aging sections

Soft wash with a low-pressure rinse

Brick

Handles a broader range of pressure, but the mortar joints need a look first

We check the mortar before we start and go gentler on older joints

Stucco and EIFS

Excess pressure can damage the finish

More cleaning solution and less force

Painted wood

Pressure can strip or lift the paint

Careful pressure control and a solution made for painted surfaces

Fiber cement (Hardie board)

Holds up well to soft washing, and the finish still needs protecting

A controlled soft wash

Aluminum

Thin panels can dent under high pressure and leave a chalky film on the surface

Low pressure and a cleaning solution that suits the finish

We identify your siding material at the first inspection and set the process to match.

House Washing vs. Pressure Washing

House washing uses low pressure and a cleaning solution made for siding. Homeowners often call it house power washing or house pressure washing, though the rinse uses much less force.

Pressure washing suits tougher surfaces like concrete, and the same force that is safe for a driveway can crack vinyl, chip paint, or push water behind your siding. That is why low-pressure house washing is the standard for homes. For the full side-by-side, read soft washing vs. pressure washing for siding, or see how soft washing works on roofs, fences, and decks.

Our House Washing Process

1

Exterior Inspection

We identify siding materials, areas with heavier buildup, and any surfaces that need extra attention.

2

Property Preparation

We pre-soak landscaping and cover nearby surfaces before cleaning begins, so plants and everything around the house stay protected throughout the process.

3

Cleaning Solution Application

Applied evenly across the exterior and left to dwell for 10 to 15 minutes, breaking down algae, mold, and mildew before rinsing.

4

Low-Pressure Rinse

We rinse everything at controlled, low pressure, appropriate for the siding, removing loosened buildup without relying on excessive force.

5

Final Quality Check

We walk the property to check for consistent results and take care of any spots that need a second pass.

Can House Washing Damage Siding or Push Water Inside?

House washing can damage siding when the pressure is too high or the spray hits the wall at the wrong angle. Hard water can bend thin panels, loosen caulk, and push water behind lap siding, where it sits against the sheathing out of sight. Our process uses low pressure and lets the cleaning solution loosen the buildup, so the siding doesn’t take the force.

Siding makers set pressure limits of their own. James Hardie’s maintenance bulletin for fiber cement siding says pressure under 1,500 psi lowers the chance of damage, recommends wide fan tips, and keeps the nozzle at least 6 feet from the wall. A soft wash works at lower pressure than that limit, and our guide to pressure washing damage covers what can go wrong on other parts of a property.

Water on the wall during a wash is normal because siding is made to shed rain downward. A hard spray aimed upward is what forces water behind the laps, so we keep the rinse at low pressure.

How to Get Your House Ready for a House Wash

Getting a house ready for a wash takes very little work, and here’s a short checklist that covers it.

  • Close and latch every window and door.
  • Move furniture, grills, planters, and decorations away from the walls.
  • Keep pets indoors while the wash is underway.
  • Note any spots that worry you, like loose siding or peeling paint, so we can look at them during the inspection.

We pre-soak landscaping and cover nearby surfaces before cleaning begins, so your plants stay protected. Our guide on landscaping and pet safety explains how, and what to expect during your appointment walks through the visit from arrival to the final check.

How Much Does House Washing Cost in Lexington, KY?

$300 to $500 starting, smaller homes

House washing in Lexington usually starts around $300 to $500 for a smaller home. The final price depends on the home’s size, the siding material, how much buildup there is, and how easy the house is to reach. Our house washing cost guide breaks the price down in more detail. After a quick assessment, you get a clear estimate with no hidden charges. See our pricing guide for how house washing compares with every other service.

What Can House Washing Fix on Oxidized, Chalky, or Stained Siding?

Not every faded spot on siding is dirt. Older painted or vinyl siding can oxidize over time, which leaves a faded, chalky look. A quick chalk test shows the difference: rub a clean cloth across the siding, and a colored powder on the cloth means the siding is oxidized. Oxidation is a change in the siding surface itself, so washing removes the loose powder but can’t bring back the original color.

A black, sooty film is a different problem, because it can be bourbon fungus, which grows where whiskey vapor settles. Our bourbon fungus removal page explains how it’s removed. We check for all of these during the inspection and tell you up front what cleaning can and can’t improve.

When to Wash a House in Lexington and How Often

Mild, dry days work best for a house wash, and Lexington usually gets plenty of them in spring and fall. Our scheduling guide for Lexington weather explains how rain, heat, and cold affect timing.

Most Lexington homes need a wash every 12 to 24 months, and shaded sides need it sooner because shade keeps siding damp. Algae and mildew grow back faster on damp walls, so the north side of a home and any wall under trees often turns green first.

Green or black streaks, gray patches under the eaves, and dark spots on shaded walls are common signs that a house is due for a wash.

DIY House Washing vs. Hiring a Pro in Lexington

DIY house washing with a pressure washer can damage siding when the pressure is set too high. Hard spray can gouge wood, dent aluminum, and drive water behind vinyl, and working on a ladder adds a fall risk on two-story walls.

A garden sprayer and a mild cleaner can handle a small, low wall, like a shaded corner by the porch. Tall walls, second stories, and heavy algae carry less risk with a pro. If you decide to hire out, our guide on how to choose a pressure washing company lists what you’ll want to ask before you book.

Recent House Washing Projects

On a Georgetown home, we soft washed the siding and pressure washed the patio on the same visit, before family came to town, and we pre-soaked and covered the landscaping first. You can read it in our house washing and patio case study. The photos below show recent house washing projects in Lexington.

Recent house Washing project

Whole-house exterior cleaning near Lexington, including the brick driveway. Removed dirt, grime, and organic buildup to give the home and surrounding surfaces a cleaner, more refreshed appearance.

Recent house Washing project

House washing project featuring siding affected by algae, mildew, and exterior grime. Cleaned the siding to restore a brighter, more uniform appearance around the entryway.

Is House Washing Worth It Before Selling My Home?

Washing your house before selling is worth it. A clean exterior is one of the first things a buyer notices, often before they step out of the car. Algae streaks, dirty siding, and faded trim can make a well-kept home look neglected from the curb, and that colors a buyer’s first impression before they see the inside.

Compared with other pre-listing fixes, house washing is one of the least expensive ways to boost curb appeal, and most homes take about a day, though larger homes can take longer.

Common Questions

Frequently Asked Questions

Below are answers to some of the questions homeowners and business owners ask before scheduling
house washing services in Lexington.

Most Lexington homes need a wash every 12 to 24 months. Shaded sides and homes with heavy tree cover often need it sooner, since algae grows faster in those conditions and returns more quickly between washes.

Pressure washing can damage paint on trim and siding. High pressure can crack paint, strip the finish, and force water behind siding. That’s why we soft wash, with low pressure and a cleaning solution made for painted surfaces, so buildup comes off and what’s underneath stays put.

House washing removes algae and mildew. The cleaning solution breaks them down at the surface, and we rinse everything away completely.

Before the appointment, close your windows and move anything you don’t want to get wet away from the house. That’s really it, and we handle the rest.

A full house wash covers siding, fascia, soffits, gutter exteriors, downspouts, and entryways, along with a rinse of the areas around windows and doors. We walk the property with you before we start so you know exactly what’s covered.

House washing in Lexington usually starts around $300 to $500 for a smaller home. The final price depends on the home’s size, the siding material, how much buildup there is, and how easy the house is to reach. Our pricing guide shows how house washing compares with every other service.

Soft house washing means cleaning your siding with low pressure and a cleaning solution that breaks down algae and mildew, with no hard blasting. It’s the safest method for vinyl, painted wood, stucco, and fiber cement. Our soft washing page explains the method, and our siding comparison covers when pressure washing makes sense.

Pressure washing vinyl siding is only safe when the pressure stays low, because high pressure can crack panels and force water behind them. We soft wash vinyl with a cleaning solution and a gentle rinse, and our vinyl siding cleaning page covers the details.

House washing shouldn’t push water inside the home when the pressure stays low. High pressure aimed up under the siding is what forces water behind the laps, which is why we rinse at low pressure. Our guide to pressure washing damage explains the risks in more detail.

House washing removes dirt and loose chalky powder from the surface, but washing can’t bring back the color of oxidized siding. We check for oxidation at the inspection and tell you up front what cleaning can and can’t improve.

House wash time depends on the size of the home, the amount of buildup, and the siding material. Many homes take about a day, and larger homes can take more than 24 hours.

A house wash can harm plants when the cleaning solution isn’t controlled. We pre-soak landscaping and cover nearby surfaces before cleaning begins, and our landscaping and pet safety guide explains the steps.

Mild, dry days in spring and fall are the best time to wash a house in Lexington. Our weather scheduling guide explains how rain, heat, and cold affect the booking.

We wash houses across Lexington and nearby towns like Georgetown, Nicholasville, Versailles, and Frankfort. Searching for a house washing company near you? Call (859) 435-1790 or send your address, and we’ll tell you if we cover your street.

Our 30-Day Satisfaction Guarantee

If the same algae or mildew appears again on your siding within 30 days, we’ll come back and clean that area again at no extra charge. This guarantee is our commitment to the quality of our soft washing work. Just contact us within 30 days, and we’ll schedule it.

Related Exterior Cleaning Services

House washing is often completed alongside other exterior cleaning services to give your property a more consistent appearance.

Ready to Schedule Your House Washing?

Tell us your address and siding type, and we’ll recommend the right soft wash and send a clear estimate. You can also call (859) 435-1790.